Verfahren Ejector :
Das Ejector-Tiefbohrverfahren wird im Durchmesserbereich von ca. 18 bis 250 mm eingesetzt.
Die Zufuhr des Kühlschmiermittels erfolgt zwischen dem Bohrrohr und einem Innenrohr ( Zweirohrverfahren ).
www.tbt.deEjector procedure :
The ejector deep hole drilling procedure is utilised in the diameter range from approx. 18 to 250 mm.
The coolant lubricant feed is between the boring tube and an inner tube ( two tube system ) The coolant lubricant emerges at the side on the boring head, which it rinses, and flows back with the chips through the inner tube.
www.tbt.deBir kelime, bir kelime grubu veya bir çeviri mi eklemek istiyorsunuz?
Bize yeni bir kelime gönderebilir.PONS'un bu kaydında bir hata olduğunu düşünüyorsanız burada bir not bırakabilir veya düzeltmek için bir öneride bulunabilirsiniz:
Çevirileri nasıl kelime antrenörüne aktarabilirim?
Kelime listesindeki kelimelere sadece bu tarayıcıda erişilebileceğine dikkat edin. Kelime antrenörüne aktarıldıkları anda her yerde erişilir hale gelirler.